![X-level Google Pixel 3 Case, Mobile Phone Case [Guardian Series] Soft TPU Matte Finish Slim Fit Ultra-Thin Light Protective C](https://images-na.ssl-images-amazon.com/images/I/51VnS6t7azL._AC_UL160_SR160,160_.jpg)
Very good case for the Pixel. I liked my Diztronic cases on my previous phones, including a Galaxy S5. They were relatively inexpensive, well made, fitted the phones quite snugly and had very well placed cut-outs. The one for the Pixel follows the same trend. It is reasonably thin and fits the phone very snugly. The cut-outs are generous, especially the one for the headphone jack, which is nice. The case has a nice matte texture which is quite grippy. The front has an elevated "rim" that protects the screen. The fingerprint sensor on the back stays accessible and access is not restricted by the case itself. No issues operating the power or volume up/down buttons either. Lastly, the Diztronic logo has been moved to the side the case - so the back is quite uncluttered.
One minor nit is that the cut out around the charging port has edges that feel a bit sharp. Since this is the area where my little finger lands to support the phone, it is a slight inconvenience.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Buy it with
$9.90
Get it as soon as Saturday, May 11
Only 4 left in stock - order soon.
+
![[3-Pack] FANGTIAN 3D Curved for Pixel 7 Pro Screen Protector Tempered Glass, 9H Glass for Google Pixel 7 Pro 6.7Inch -[Finger](https://images-na.ssl-images-amazon.com/images/I/717D4ez8R5L._AC_UL116_SR116,116_.jpg)
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Customers also viewed these products
Page 1 of 1 Start overPage 1 of 1
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Climate neutral by ClimatePartner certifies the carbon footprint of a product was calculated and all associated emissions were offset.
Reviews with images
Great product as always from Diztronic
I have used Diztronic Matte TPU cases for all of my own and my friends/family's devices (Nexus 4, Galaxy S4, HTC One M7, Nexus 5, iPhone 6s, and now Google Pixel). Diztronic cases have always worked really well and fit very nicely. When I pre-ordered the Google Pixel, I naturally went with Diztronic. Even though the release was not until Nov. 2, I waited patiently.Packaging: Individually packaged labeled for Pixel. Of note, other cases from other manufacturers were labeling their products Sailfish/Marlin prior to the confirmed name change to Pixel and Pixel XL.Finish: As a typical Diztronic case, the finish is matte black and non-slippery. The texture is JUST a little bit grippier than your typical TPU cases. I personally like the texture because it makes it easier to hold. You can find the Diztronic logo on the right side below the volume rocker buttons.Fit: Diztronic cases have always fit perfectly and this is another one that fits the mold. The tight fight makes for a low profile phone case while always protecting your expensive device. As always, diztronic cases have a small (maybe 1.5 mm) lip on the screen side that allows you to put your phone face down without you worrying that it will scratch the glass.Buttons: This is the first time that I have used their "Fluid Motion Button Design." Previously, from my experience, the case buttons were completely closed off (provided a full case, not exposing the buttons). This new design has slits around the buttons so the case no longer fully encloses the buttons. The "Fluid Motion Button Design" allows for a more tactile "CLICK" when pressing the buttons. Personally, I prefer to have a fully enclosed button to protect from dirt/dust/water. A tactile click is something I personally would not care much about.Cutouts: Precise cut outs. At the top, cutout for the 3.5 mm. Bottom Center: USB-C cutout. Bottom Left and Right: Speaker cutout. Back: Camera & Pixel Imprint (Fingerprint sensor).Rating: 4.9/5 Stars. The reason I did not give it 5/5 is because of my personal preference for an enclosed button in case of dirt/dust. I expect this to still be a great case nonetheless.Pictures Included. Please note that the last picture is of my Nexus 5 case showing the older style button.Edit: Amazon only posted 2 of my pictures. I had uploaded more pictures showing how the cutouts fit the phone which Amazon did not include.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on November 2, 2016
Packaging: Individually packaged labeled for Pixel. Of note, other cases from other manufacturers were labeling their products Sailfish/Marlin prior to the confirmed name change to Pixel and Pixel XL.
Finish: As a typical Diztronic case, the finish is matte black and non-slippery. The texture is JUST a little bit grippier than your typical TPU cases. I personally like the texture because it makes it easier to hold. You can find the Diztronic logo on the right side below the volume rocker buttons.
Fit: Diztronic cases have always fit perfectly and this is another one that fits the mold. The tight fight makes for a low profile phone case while always protecting your expensive device. As always, diztronic cases have a small (maybe 1.5 mm) lip on the screen side that allows you to put your phone face down without you worrying that it will scratch the glass.
Buttons: This is the first time that I have used their "Fluid Motion Button Design." Previously, from my experience, the case buttons were completely closed off (provided a full case, not exposing the buttons). This new design has slits around the buttons so the case no longer fully encloses the buttons. The "Fluid Motion Button Design" allows for a more tactile "CLICK" when pressing the buttons. Personally, I prefer to have a fully enclosed button to protect from dirt/dust/water. A tactile click is something I personally would not care much about.
Cutouts: Precise cut outs. At the top, cutout for the 3.5 mm. Bottom Center: USB-C cutout. Bottom Left and Right: Speaker cutout. Back: Camera & Pixel Imprint (Fingerprint sensor).
Rating: 4.9/5 Stars. The reason I did not give it 5/5 is because of my personal preference for an enclosed button in case of dirt/dust. I expect this to still be a great case nonetheless.
Pictures Included. Please note that the last picture is of my Nexus 5 case showing the older style button.
Edit: Amazon only posted 2 of my pictures. I had uploaded more pictures showing how the cutouts fit the phone which Amazon did not include.
Color: Matte BlackVerified Purchase
Great product as always from Diztronic
Reviewed in the United States on November 2, 2016
I have used Diztronic Matte TPU cases for all of my own and my friends/family's devices (Nexus 4, Galaxy S4, HTC One M7, Nexus 5, iPhone 6s, and now Google Pixel). Diztronic cases have always worked really well and fit very nicely. When I pre-ordered the Google Pixel, I naturally went with Diztronic. Even though the release was not until Nov. 2, I waited patiently.Reviewed in the United States on November 2, 2016
Packaging: Individually packaged labeled for Pixel. Of note, other cases from other manufacturers were labeling their products Sailfish/Marlin prior to the confirmed name change to Pixel and Pixel XL.
Finish: As a typical Diztronic case, the finish is matte black and non-slippery. The texture is JUST a little bit grippier than your typical TPU cases. I personally like the texture because it makes it easier to hold. You can find the Diztronic logo on the right side below the volume rocker buttons.
Fit: Diztronic cases have always fit perfectly and this is another one that fits the mold. The tight fight makes for a low profile phone case while always protecting your expensive device. As always, diztronic cases have a small (maybe 1.5 mm) lip on the screen side that allows you to put your phone face down without you worrying that it will scratch the glass.
Buttons: This is the first time that I have used their "Fluid Motion Button Design." Previously, from my experience, the case buttons were completely closed off (provided a full case, not exposing the buttons). This new design has slits around the buttons so the case no longer fully encloses the buttons. The "Fluid Motion Button Design" allows for a more tactile "CLICK" when pressing the buttons. Personally, I prefer to have a fully enclosed button to protect from dirt/dust/water. A tactile click is something I personally would not care much about.
Cutouts: Precise cut outs. At the top, cutout for the 3.5 mm. Bottom Center: USB-C cutout. Bottom Left and Right: Speaker cutout. Back: Camera & Pixel Imprint (Fingerprint sensor).
Rating: 4.9/5 Stars. The reason I did not give it 5/5 is because of my personal preference for an enclosed button in case of dirt/dust. I expect this to still be a great case nonetheless.
Pictures Included. Please note that the last picture is of my Nexus 5 case showing the older style button.
Edit: Amazon only posted 2 of my pictures. I had uploaded more pictures showing how the cutouts fit the phone which Amazon did not include.
Images in this review
Top reviews from other countries
Ilja X
Super Schutz - etwas zu dick
Reviewed in Germany on March 8, 2018Color: Matte BlackVerified Purchase
ninooo
I am an old diztronic customer since nexus 4 and they have always the perfect cases. this is another great case
Reviewed in the United Kingdom on May 13, 2017Color: Matte BlackVerified Purchase
Ps
Can't go wrong with Diztronic
Reviewed in Canada on January 29, 2017Color: Matte BlackVerified Purchase
