conanthewarrior
Achiever
- Joined
- May 17, 2015
- Messages
- 3,061
hi everyone, I had a DNA40 clone squonker and the board gave up the ghost.
I tore the board out, and found that if I connect the red and black wires at the top of the mod to the red and black wires at the bottom of the mod, when I touch the last two together it fires, like a mech mod. I need to switch them though so red goes to black for both wires- black to black and red to red doesn't work.
Obviously, I will need a switch. I just wanted to make sure before I buy a switch, will this be safe to do? As in simply wiring it to be a mech mod instead of regulated. It does fire when I press the last wire in place, so seems like it will work.
Which switch would you recommend? it needs to be 10MM maximum in diameter, so it can fit in the standard switch hole.
Thanks, Conan.
I tore the board out, and found that if I connect the red and black wires at the top of the mod to the red and black wires at the bottom of the mod, when I touch the last two together it fires, like a mech mod. I need to switch them though so red goes to black for both wires- black to black and red to red doesn't work.
Obviously, I will need a switch. I just wanted to make sure before I buy a switch, will this be safe to do? As in simply wiring it to be a mech mod instead of regulated. It does fire when I press the last wire in place, so seems like it will work.
Which switch would you recommend? it needs to be 10MM maximum in diameter, so it can fit in the standard switch hole.
Thanks, Conan.