Which one out of these wires?

So guys,

I’m at that point now where I’m gonna try and build my own coils...

Required for my Dreamer mech so looking for around 0.14-0.18ohm dual build

So out of these, what would be most appropriate and any pros and cons of each would be great.
(Last attached is N80 22/38)

Thanks if anyone can help here, hope everyone is cool and enjoying some sun for a change

Louay

If it has to be from flatware UK then I would go with the 22ga flat80 as you will get better ramp up and still bags of flavour and cloud [emoji6]

The last one is what I use in my kylin and gets to about where you want ohms wise with 5 or 6 wraps (I forget what I used last time)

The top one is probably 22g flat brochrome.

The middle one is a good starter and i use it quite often.

Bottom one is a 22g core with a 38g wrap.

For a beginner i would pick the middle one or the top one if you can get it in a 26g.
Then once you have a bit more experience youll have more idea what youre after.

Thanks for your help guys, I’ve also some Kanthal A1 that came with my coilmaster kit but I’ve read I’d need to parallel build with that 5/6 wraps to get the ohms that low on a dual?

Presumably no parallel building for the above just straight wrapping around a 3mm screwdriver bit..jig...you know what I mean lol

Thanks guys

Lou

22/38 all day long.

I use it all the time and love it. Ramp up is superb. Resistance is good. A quality wire. 5 or 6 wraps in a dual build... Muah! Perfecto!

Yep, the 22/38 Ni80 flapton wire is cracking.
Super on a mech. Nice low builds off this one. Great for 4.2 volt mechs.

Mitz said:

I use it all the time and love it. Ramp up is superb. Resistance is good. A quality wire. 5 or 6 wraps in a dual build... Muah! Perfecto!


View attachment 157939

Click to expand...

Apologies for my douche dumbness but is that the last one of the three pics I posted @Mitz ? And presumably a 5-6 wraps for the resistance I’m looking for? Thanks though dude

Louay said:

Apologies for my douche dumbness but is that the last one of the three pics I posted @Mitz ? And presumably a 5-6 wraps for the resistance I’m looking for? Thanks though dude

Click to expand...

You didn't post a pic of that one. You mentioned it in your post and it was last in your list but no pic. A dual build with 5 or 6 wraps will come out around .12 to .15 and as mentioned by atomic it's perfect for a single battery mech with a quality battery.

http://www.flatwireuk.com/?product=flapton&v=79cba1185463