How to Temper Chocolate

Co-authored by wikiHow Staff

Last Updated: April 29, 2021 Tested

VIDEO

You can't simply melt chocolate and then expect it to return to its original glossy, firm state. For chocolate to return to this state it has to be heated and cooled to allow a certain type of crystal (crystal V) to develop. This heating and cooling process is called tempering and it can be done in a number of different ways. Keep reading to find out how to give your chocolate creations the perfect shine and snap.

Method 1

Method 1 of 3:

Tempering by Adding Chocolate Solids (Seeding)

1
Gather your equipment, and preferably one to two pounds of chocolate. Chop your chocolate into small pieces, or use chocolate disks, sold by many manufacturers at gourmet stores or online from professional chocolate suppliers. The more chocolate you use, the easier the process is to manage.^{[1]
X
Research source}
- Try to chop your chocolate as uniform as possible. Chocolate that's uniformly chopped will melt evenly and lower the risk of scorching. If you want, you can use a serrated knife to cut the chocolate into even chunks, or you can look for chocolate chips that are evenly molded.
- Set aside approximately 1/3 of the chopped chocolate for later use. It will not be used in the initial double-boiling.
Fill it just full enough so that your other bowl — your bowl with chocolate — will rest nicely inside without spilling the water.
3
Place your chopped chocolate in the dry, stainless steel bowl. Melt it gently over a pot of very gently simmering water by resting the bowl on the top of the pot of water. The bowl should be bigger than the pot and should not be submerged in the water, but resting on the edge of the pot.
- Do not bring the water underneath the chocolate to a boil. Also, don't rush the melting by turning up the heat on the stove. Trying to melt the chocolate too soon will cause it to scorch, ruining the taste and the tempering process.
- Be careful not to allow any water to get in the chocolate, or it will seize. This is very important.
Once the chocolate is fully melted it should feel warm to the touch. Place the bowl of melted chocolate into the bowl with ice water, and begin to stir slowly but constantly. Once it begins to thicken and reaches a temperature of 95°–100°F, crystallization or "tempering" is occurring, and you can remove it from the cold water.^{[2]
X
Research source}
Incorporate the two forms of chocolate so that the final mixture is smooth.^{[3]
X
Research source}
6
Start test for temper or crystallization at 90°F by dipping a spoon into the chocolate. It should set up a hard, firm, and shiny with 2 to 3 minutes, in a 65°-72°F environment. If it appears spotty or dull, you need to continue stirring, applying heat or cold as necessary to keep it soft and workable, but not too thin.^{[4]
X
Research source}
- It should feel cool to the touch; a good test spot for temperature is to place a dot on your lower lip. If it feels cool, the temperature is probably about right.
When the chocolate sets quickly, uniformly, with good shine and no spots, it is ready to use. You can fill molds, make bark, dip dried fruits, biscuits, cookies, or anything else with it. You can flavor it with fat-soluble oils (mint, lemon, orange, etc.) as well.

Advertisement

Method 2

Method 2 of 3:

Tempering by Tabling

1
Gather and chop your chocolate into even pieces. A serrated knife works well here, although you can skip the cutting altogether if you decide to buy chocolate chips or coins.
- Set aside approximately 1/3 of the chopped chocolate for later use. It will not be used in the initial double-boiling.
You want steam to be coming from the pot, but boiling water can cause the chocolate to scorch or melt too quickly.
Make sure the bowl with the chocolate rests on top of the pan, keeping any moisture or water away from the chocolate. Water that is introduced to chocolate can cause it to seize.^{[5]
X
Research source}
Do not melt beyond this point or the chocolate will scorch.
Heat until the mixture becomes smooth again.
6
Begin "tabling" the chocolate on a smooth, cool surface such as marble. Take the chocolate off the heat and spread 2/3 of it over a cool surface. Next:^{[6]
X
Research source}
- With a spatula, work the melted chocolate by scraping and stirring it across the cool surface. This process will smooth and cool the chocolate.
- Continue tabling until a temperature of 80°–82°F is reached. Return the cooled mixture to the reserved mixture and put the whole mixture on top of the light heat again.
7
Stirring constantly, wait until the chocolate gets to a temperature of 87°–91°F. Take the chocolate off the double boiler. Use the chocolate in molds, biscuits, cookies, dipping, etc.
- Is the chocolate sticky to the touch even after a little while? Sticky chocolate has not been properly tempered.^{[7]
  X
  Research source} The chocolate should set and be firm after 2 to 3 minutes.
Advertisement

Method 3

Method 3 of 3:

Understanding the Numbers

1
Mind a note on different types of chocolate. Different kinds of chocolates have different kinds of cacao concentrations, as well as cocoa butter concentrations. Knowing which type of chocolate you're working with is essential to tempering correctly.^{[8]
X
Research source}
- Dark chocolate (no milk content) tempers ideally at 88-90°F (31-32°C)
- Milk chocolate tempers ideally at 86-88°F (30-31°C)
- White chocolate tempers ideally at 80-82°F (27-28°C)
2
Know how the fats in cocoa butter crystalize. There are several different stages to the crystallization of cocoa butter fats. Melting and tempering good chocolate is all about getting the crystals to stage V of the process:
- Stage I — 17 °C (63 °F) — Chocolate is soft, crumbly, and melts too easily
- Stage II — 21 °C (70 °F) — Chocolate is soft, crumbly, and melts too easily
- Stage III — 26 °C (79 °F) — Chocolate is firm, snaps poorly, and melts too easily
- Stage IV — 28 °C (82 °F) — Chocolate is firm, snaps well, but melts too easily
- Stage V — 34 °C (93 °F) — Chocolate is glossy, firm, snaps well, and melts near body temperature
- Stage VI — 36 °C (97 °F) — Chocolate is hard and takes too long to form
Advertisement

Community Q&A

Search

Add New Question

Question

Do I have to use a stainless steel bowl?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

It is best to use a stainless steel bowl because it does not absorb or impart odors to the melted chocolate. It is also lighter than glass bowls, making it easier to pick up and handle.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 2
Question

What is the best temperature for tempering chocolate?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

The best temperature for tempering depends on the type of chocolate being tempered. For milk chocolate, temper it at 29ºC/84ºF; for plain chocolate, temper it at 31ºC/88ºF; and for white chocolate, temper it at 28ºC/82ºF.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 2
Question

Why is my chocolate whitish?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Chocolate that has been tempered at too high a temperature "seizes" and when it cools down, it loses its shine and develops what is known as a "bloom," which is the whitish color to which you're referring. Unless burnt, the chocolate is still edible but not pleasant in appearance. Next time, use a candy thermometer to check that you're not exceeding the tempering temperature.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 0

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

A chocolate tempering thermometer can be used, but tempering can be done without one.

Thanks
Helpful 17 Not Helpful 7
The precise temperature curve for tempering dark chocolate begins at about 110F (fully melted). The chocolate is then cooled to 86 or below, at which point it will begin to thicken. The chocolate then needs to be rewarmed to about 90-92F, at which point it is workable and remains "in temper" or is properly crystallized.

Thanks
Helpful 18 Not Helpful 11
The precise temperature curve can vary by 2-3F depending on the chocolate.

Thanks
Helpful 9 Not Helpful 5

Things You'll Need

2 stainless steel bowls of similar or same sizes — one for chocolate, one for ice water
Stove or microwave for warming water
Ice
Spoons for stirring
Pan for a bain-marie.