Download Article Download Article

Doing karate is a great way to learn self-defense, strengthen your body, and focus on your inner balance. However, if you’re just starting out, tying the belt correctly can be a little intimidating. While using both sides to knot your belt is the most common way, there are a few different ways to tie a karate belt, so if you’re confused, you should ask the instructor at your particular school. You can use both sides to knot your belt for a wraparound look, or just use the left side to knot for a cleaner, smoother line.

Method 1
Method 1 of 2:

Using Both Sides to Knot

Download Article
  1. Hold your belt out in front of you and match the ends together so they’re even. Run your hands along the length of your belt to smooth it out before you start.[1]
    • White belts will often have a tag on one end of the belt. As you progress in colors, your belts won’t have a tag anymore.
  2. Unfold the belt so that it’s in one long line again, keeping your hands on the center. Wrap the belt around your stomach, placing the center directly on your belly button. Make sure that both sides of the belt are even so you know it’s positioned correctly.[2]
    • If you can’t tell if your belt is even, try standing in front of a mirror to double check.
    Advertisement
  3. As you bring the ends of the belt around to your back, switch hands so you’re now holding the opposite ends. Cross them over each other behind you, then bring the two ends back around to your front.[3]
    • This part can be a little tricky, especially if you’re just starting out. Don’t give up!
    • Make sure the ends are still even in front of you.
  4. Pick one end and fold it over the center, laying it on the belt over your stomach. Do the same thing to the other end so that they’re crossed over each other directly over your belly button.[4]
    • If there are any wrinkles in your belt, smooth them out so it’s flat.
  5. Take the end of the belt that’s on the very top and pull it underneath all the layers of your belt. Grab the end that you just pulled underneath and pull it up towards you directly against your stomach to create a small knot.[5]
    • Make sure this knot is tight against your waist, but not so tight that you can’t move around or breathe.
    • If the ends of the belt are uneven, slide your belt around on your waist to fix it before you move on.
  6. Grab the end of the belt that’s sticking out from underneath all of the layers and cross it under the top end. Pull the bottom end up through the middle of the cross you created, then pull the bottom end up to tighten the knot. Make sure the ends are hanging evenly.[6]
    • If your belt is too tight, you can adjust it by loosening the last knot you just made.
    • Make sure your final knot sits directly over your belly button.
  7. Advertisement
Method 2
Method 2 of 2:

Using the Left Side to Knot

Download Article
  1. Hold the belt up in front of your belly button, but only leave about 1 forearm’s length of slack on the right side. Keep the left side super long to work with later.[7]
    • The right side won’t move much throughout the tying process, so keep a good grip on it.
  2. Holding the right end in place, wrap the left side around you once, then wrap it around again. Tuck the right end of the belt underneath the left end as you wrap to hold it in place.[8]
    • If your belt is short, you may be able to only wrap it around once.
    • Wrapping the belt behind you instead of crossing it over creates a flatter, smoother line in the back.
  3. Grab both ends of your belt and pull them over until they’re both centered over your naval. If the sides are uneven, slide your belt around on your waist until they’re both the same length.[9]
    • You don’t need to undo your belt to do this, so try to just shimmy it instead of taking it off.
  4. Grab the end of the belt that you wrapped around your body and push it up under all of the layers of the belt on your stomach. Pull it up through the layers, then pull it tight to make a loose knot.[10]
  5. Grab the bottom end of the belt, or the right side, and cross it underneath the top end out in front of you. Pull the bottom end up through the center of the cross, then pull the bottom end up to make a knot. Make sure the ends are hanging evenly.[11]
    • You can loosen the knot if you need to by grabbing the center and pulling it apart.
  6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Shouldn't the belt ends hang down evenly? In these examples, the top end juts upward, and it should go downward.
    Community Answer
    Community Answer
    No, often it really is about the knot and not how it looks. Also, when it hangs down, it might interrupt the kick. It's best if it hangs 45 degrees or higher from your knees.
  • Question
    Does this work for any martial art belt?
    Community Answer
    Community Answer
    Yes, it does. I practice Taekwondo and most people in my class tie their belt this way.
  • Question
    How should I tie my karate belt if it is too long?
    Community Answer
    Community Answer
    Wind it around twice before tying. If this doesn't work, either cut the belt and stitch the cut end to prevent fraying, or buy a smaller belt.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Video

Tips

  • If your belt doesn't come out right, don't worry! Instructors are forgiving on white belts. With a little practice you will get the hang of it.
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement

About This Article

Hannah Madden
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow staff writer, Hannah Madden. Hannah Madden is a writer, editor, and artist currently living in Portland, Oregon. In 2018, she graduated from Portland State University with a B.S. in Environmental Studies. Hannah enjoys writing articles about conservation, sustainability, and eco-friendly products. When she isn’t writing, you can find Hannah working on hand embroidery projects and listening to music. This article has been viewed 530,379 times.
24 votes - 80%
Co-authors: 35
Updated: April 24, 2023
Views: 530,379
Categories: Featured Articles | Karate
Article SummaryX

To tie on your karate belt, begin by finding the center of the belt and putting it over your navel. Then wrap each end around your back and bring them back to the front. Take the piece of belt on your left and fold it down and under the two layers of belt. Next, tie a square knot by crossing the ends of the belt and folding the left under the right. Make sure the knot is centered and you’re ready to go! If you want to learn how to tie your belt only using the left side, keep reading the article!

Did this summary help you?

Thanks to all authors for creating a page that has been read 530,379 times.

Reader Success Stories

  • Anonymous

    Anonymous

    Nov 5, 2023

    "I learned to tie my first Karate belt!!"
Share your story

Did this article help you?

Advertisement