Tips for Choosing the Right Water Pump

image_pdf

Whether part of a typical water removal project or in the event of an emergency such as a flood, which can happen during early spring in many locations of the country, a pump is an essential tool in removing unwanted water from a location quickly and efficiently.

Though, on the surface, the task a pump performs is quite general, a pump is not a one-size-fits-all piece of equipment. There are several types of pumps available, as well as varying degrees of quality. To be sure a landscape professional chooses the proper pump, and one that will provide years of reliable use, he or she must do a little homework on the types of pumps available, learn the ideal applications for each and know what to look for in a quality pump.

How pumps work

Most small dewatering pumps are classified into the primary category of centrifugal. All centrifugal pumps work using the principle of centrifugal force, in which force moves objects away from the center in a system of circular motion, increasing the pressure as it rotates. In the centrifugal pump, this force is caused by the rotation of the impeller, a circular disk, with vanes that sling water around.

Landscapers and lawn care professionals should research the type of pump needed before making an investment.

The impeller is enclosed within a housing known as the volute, and it collects and directs liquids through the pump. As the liquid is rotated, its velocity is increased, allowing it to be expelled from the pump very quickly.

This motion is much like swinging a rock tied on a string. The velocity increases, and when it’s released it swings out, away from the center. In the case of the pump, this increasing pressure takes place inside the volute, and the liquid is forced through the discharge.

Within the broad class of centrifugal, a few different models exist. Each has a slightly different make-up and is intended for certain applications and water types.

On the simple side

A standard centrifugal pump is the most basic type of pump that handles the simplest duties.

Used to move clean water that has little or no debris, a standard centrifugal pump is perfect for tasks such as draining a pool or removing unwanted standing water. While these applications can be undertaken with virtually any pump, a standard centrifugal pump is a logical choice for anyone with these basic types of jobs, as it is the least expensive and performs its function very well.

Stepping up from standard

Because not all water is clean and debris-free, there are pumps designed to handle water with a higher solid content.

A semi-trash pump has an impeller similar to the one found in a standard centrifugal pump, but it has deeper vanes to move more debris as needed. These pumps also generally have a larger discharge opening than a standard centrifugal pump to allow for smaller debris and particles to easily pass through.

A pump with stainless steel or die-cast aluminum parts, rather than plastic, can be longer lasting.

Tough on trash

Trash pumps are almost identical to semi-trash pumps, but have even deeper impeller vanes to allow for the largest discharge capacity.

These pumps are used to move water that is muddy, sandy or contains other solids that would damage the inner workings of a standard centrifugal pump. Generally, trash pumps are built with more heavy-duty pump housing, which make them more versatile. A trash pump is often standard equipment on virtually any construction site that needs to move water, particularly when there is a potential for that water to contain abrasive materials.

Wanted: a workhorse

Of all the pumps available, a diaphragm pump may be the most versatile. It’s generally considered the universal pump, as it can usually be used for any pump application. A diaphragm pump is capable of handling sticks, stones, mud, trash and other large debris. Basically, anything that can fit through the opening will be able to go through without damaging the pump. It will pump seawater, re-circulated water, as well as muddy, sandy and viscous water.

Despite its universal appeal, a diaphragm pump is the most expensive, so most users only choose it if it’s the only pump that will work. Additionally, diaphragm pumps operate at a much slower rate than centrifugal units, so speed is another factor that must be taken into consideration.

Unlike the standard centrifugal, semi-trash and trash pumps, the diaphragm pump does not have an impeller that rotates the water within the pump. Diaphragm pumps have two chambers and work using an action similar to that of an internal combustion engine. As the volume in one of the chambers is increased, the pressure in the other decreases, drawing in fluid. This fluid is later forced out once the pressure in that chamber is increased, and the process is repeated.

Quality counts

While determining the type of pump needed for a specific application and water is important, it is only one part of the overall selection process. Just as important is being able to identify the characteristics of the well-built, quality pump.

First, consider the pump’s engine. While the construction of the rest of the pump is equally important, the pump won’t operate properly without an adequate engine.

Look for one from a reputable manufacturer. Along with that, be sure the engine comes with a good warranty and that parts are easy to find if there is a problem with it in the future. Luckily, most of the maintenance on a pump engine is preventive, and simple care usually extends the life of the engine and pump as a whole. Generally, quality pump engines can be expected to last for upwards of 2,500 hours of operation, sometimes more if the recommended maintenance is followed.

Pump owners should regularly change the oil and air filter, as well as keep the spark plugs clean. Inquiring about this and other suggested engine maintenance is an important step in selecting the right pump.

Just as important as the engine are the pump housing and inner components of the pump. This is especially true on semi-trash and trash pumps, as these are more likely to handle debris and corrosive materials that can wear the pump out prematurely.

Two of the most important parts to check out before purchasing a pump are the mechanical seals and the impeller. These are extremely important because they are generally the first two parts to break down if and when there is a problem.

The mechanical seal protects the impeller from wear, and can greatly increase the overall pump life. Quality centrifugal pumps generally have self-lubricating carbon ceramic mechanical seals, and semi-trash and trash pumps have self-lubricating silicone carbide seals. These are the best seals to combat the wear caused by repeated use, and they also keep the pump from leaking. As these seals wear down, the impeller becomes more vulnerable to wear, and the probability of the pump leaking increases. Over time, this can cause unwanted air to enter the pump, and keep it from running altogether.

Another key to look for is a cast iron impeller, which is usually a sign of a well-built pump. Again, this is particularly important in pumps that will frequently be transporting solids, as this is the main cause of wear on the pump. The impeller on some models is plastic and does not stand up well over the course of time. Additionally, when buying a trash pump, the consumer should make sure the pump has a wear plate, which acts as a buffer between the impeller and volute. This piece prevents solids from passing through the pump and is not standard on lower-quality pumps.

The pump housing itself is also available in a variety of different materials. Again, the lower quality pumps will sometimes feature a plastic housing. Higher quality housing is made of stainless steel or, in the most sturdy pumps, die-cast aluminum. While this type of pump housing may cost slightly more at the initial purchase, the extended life it will afford the pump can more than make up for the money saved buying a housing that is plastic.

Another important part in all pumps is the strainer. This part has a series of holes (with different sizes depending on pump type) and keeps oversized debris from entering the intake hose and causing damage to the pump. Again, a prospective buyer should always look for a metal strainer, as the plastic pieces will usually crack or break over time and won’t keep unwanted debris out of the pump hoses, causing it to become plugged.

Just as with standard pieces of equipment, pump quality can vary greatly from one to the next. And although pumps are typically used for one simple task — moving water from point A to point B — a quality pump is clearly a wise investment, and one that will bring dependability and a greater return over time.

Editor’s note: This article was originally published in May 2016.