Pine Tray Table

below are step are the steps to make a beautiful tray table.

Take a board of pine and cut it right down the middle into equal lengths

since the wood is not wide enough you must glue about three inches of wood on to the lengths of 27 inches long.

while waiting for the glue to dry make the handles for the tray out of wood usiong a bandsaw.

Make the border the same length and width

then take 6"x2" screws and screw the handles into the border.

using 3d nails nail the border on to the center piece and use 3 nails per side

use any stain you want to and stain the entire project.

Then you are finished!