How to Make a Spider Web

Co-authored by wikiHow Staff

Last Updated: April 4, 2024 Tested

A spider web is an ideal decoration for Halloween, haunted houses, projects about arachnids, or a fun ambiance for a reading of "Charlotte's Web." There are many different ways to make a spider web based on the materials needed and the level of difficulty involved.

Method 1

Method 1 of 4:

Using Yarn

Download Article

Determine and measure where you will be placing your spider web so you know what size yarn to cut. Remember the wider the point, the larger your web.^{[1]
X
Research source} Any color will do but white or silver are more traditional colors.
2
Cut pieces of yarn and secure the frame. Cut two pieces to form one vertical length of yarn and one horizontal length which will meet in the center to become the frame of your web.^{[2]
X
Research source} The length of each piece of string will depend on where you will be hanging it, so measure the string based on the location.
- For example, if you want to hang the web from one tree to another, the area between the trees will define the length of the frame of the web. Alternatively, if your web is being hung on the front door, the width of the door is your limit.
- You can tape to the wall or tie off to nails in the wall to secure the framework.^{[3]
  X
  Research source}
Advertisement
3
Add more framework strands. Tie a string from one corner of the frame to the middle of the circle. Complete this for each corner, then the web will have eight spokes (framework threads).
- Eight spokes should be sufficient but you can always add more at a later time if needed.
4
Weave the strands of the web. Start from the center (where the vertical and horizontal pieces criss-cross) and weave the yarn around in a spiral shape. Each time you come to a supporting string, tie your yarn into an overhand knot to secure the shape of the web.^{[4]
X
Research source}
- Leave plenty of space between each capture thread layer to give the effect of the space that you see on a real web.
- If you run out of a length of string, simply tie it off, tie on a new piece, and keep weaving.
- Make sure the strings are taut to avoid drooping.
5
Clean up loose ends. Cut off or tighten loose pieces and generally tidy up the web as needed. The web is complete when you've finished weaving enough of the spiral to reach the edge of the frame.
- If you need to strengthen parts of the web that might be affected by cutting off loose ends or knots, use hot glue. Hot glue is not only fast but it works well on fabrics and woods.^{[5]
  X
  Research source}
Use store-bought plastic or furry spider toys, or make your own from pipe cleaners or similar items.

Method 2

Method 2 of 4:

Using Pipe Cleaners (Chenille)

Download Article

1
Gather three white or black pipe cleaners for each web. Pipe cleaners are pliable wires that are covered in fluffy fabric.
- You can try other colors if you're feeling adventurous.
- Pipe cleaners can be found at local arts and crafts stores like Michael's or Hobby Lobby.
2
Form the frame of your web. Twist two pipe cleaners together at the exact center of each stick to form an "X". Twist the third pipe cleaner down the center of the "X", creating what looks like a snowflake shape.^{[6]
X
Research source}
- The sticks should be spread out in a circle, leaving even gaps between each stick. This forms the web framework.
- If you are having trouble twisting the pipe cleaners together, you can use hot glue instead.
Twist on a new pipe cleaner about an inch (2.5cm) from where the sticks all join. This starts the capture web which you'll be weaving around the framework.
4
Weave the pipe cleaner around the framework of the web. Each time you reach a framework thread, twist or loop the capture thread around it once to secure it.
- Avoid pulling on the pipe cleaners as it can remove some of the tuft surrounding the wire.
- Continue weaving in this manner to create the spiral. Each time a capture thread runs out, simply wind on a new thread in the spot where the last thread left off and keep weaving.
5
Finish the web. After winding the last strand, trim loose ends using sharp scissors. There are two choices for finishing the web:
- Leave a bit of the threads from the framework extending beyond the capture thread spiral––this looks jagged and is typical of the cartoon style caricature of spider webs.
- Weave a capture thread as a border on the edge of the framework. This looks neat and finished, like a tidy spider worked there.

Method 3

Method 3 of 4:

Using Doilies

Download Article

1
Choose suitable doilies. Doilies are crocheted cotton put into round patterns with a lot of open space--just like spiderwebs.^{[7]
X
Research source} If it's possible to be picky, choose ones that look more web-like but don't fuss too much.
- You can find doilies among old belongings, at your local thrift store, and at your local arts and crafts store.
- Wash and dry the doilies if they are used or old.
2
Spray paint the doilies black (if not black already). Lay the doilies flat and spray with the black paint, passing over several times for complete color. Allow to dry, then repeat on the other side. Hang to dry when complete.^{[8]
X
Research source}
- Choose a spot with open ventilation and cover the work surface with cardboard or newspaper to prevent staining the surface underneath.
3
Attach doilies to a backdrop such as a transparent curtain or piece of cloth like a sheet.
- Space the doilies at an acceptable distance from each other to give the impression of different spiders weaving their webs. Tack in place with black thread or hot glue. Apply as many as will fit nicely.
Tie one end of black embroidery thread to the back of one doily. Thread this on the curtain from one web to the next. Don't overdo this--just a few strands here and there will give the effect of loose webs.
Use some of the embroidery thread to hold the curtain in place as if spiders have tied up the curtain while they were weaving. Hang over a good light source, like a window or anyplace like a skylight or a screen with a light behind it.

Method 4

Method 4 of 4:

Using Cheesecloth

Download Article

Cheesecloth is a very loose cotton that resembles gauze. You can find it in craft stores like Jo-Ann Fabric or Bed Bath and Beyond.
Measure the area where you will be hanging the web and measure and cut the cheesecloth accordingly. Secure the cheesecloth in place with pins or glue.
Remember, the web is meant to look old and unfinished so vary the lengths and spacing of the vertical strips. Cut from the bottom up.
Create a messy web by snipping, tearing, and making holes in each vertical strip. The more it unravels, the better.
Rub the ends of the cloth between your hands to fray the edges and glue in fake spiders as needed.

Community Q&A

Search

Add New Question

Question

Do spiders wrap flies for food?

Community Answer

Yes, some spiders do this. The spider makes a web and then the flies get stuck to it. Next, the spider wraps it up in the web and eats it.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 8 Helpful 3
Question

What will be cool to use to make webs for a Spider Man craft?

Community Answer

String (especially holographic or shiny string), clay, thread, doll hair, and even strings of thick glue can be a spiderweb. Any stringy-looking material will be okay, but make sure it gives off a "radioactive" effect.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 3
Question

Do things stick on webs?

FutureHow

Community Answer

No, nothing will stick on these webs. If you want something to stick, try adding some type of adhesive.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 2

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

For the yarn web, you can also make this on a board as backing rather than hanging it in the air. For this version, instead of tying in place, tape, glue or staple it to the back of the board. Then, instead of weaving a spiral around with the capture thread, weave it and pin it down each time it reaches a framework thread. Use a pin each side if one pin isn't enough to pierce through the yarn and hold it in place. The pins should be the same color as the string or yarn.

Thanks
Helpful 11 Not Helpful 1
Feel free to color your spider webs. A little bit of gray spray paint can help give depth of color to white material. Also, vivid orange, yellow, or other florescent colors can give a bright, otherworldly look.

Thanks
Helpful 9 Not Helpful 1
A well-placed fan can make cheesecloth spiderwebs sway and move in a creepy way.

Thanks
Helpful 9 Not Helpful 3

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

If spray painting, always do so in a well ventilated space to protect your health and prevent the build-up of fumes. Never use spray paints around infants or pets, in case of accidental inhalation.

Thanks
Helpful 9 Not Helpful 2
Keep flammable materials such as cheesecloth, paper, string, or the like away from flame sources (such as candles) and heating elements (such as space heaters).

Thanks
Helpful 9 Not Helpful 2
Avoid hanging string webs in areas where people might walk or ride into them unsuspectingly, especially if the web is large. Getting tangled up or knocked off a bicycle by such a web isn't much fun!

Thanks
Helpful 6 Not Helpful 3