This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.
This article has been viewed 326,931 times.
A home filled with the aroma of a turkey baking in the oven, whether it's for Thanksgiving or just for a big, special dinner, is an inviting experience. Yet, while most of us know how to enjoy eating the turkey, fewer of us know how to carve the turkey carefully so as to leave more for the plate and less on the bones, as well as making it easier to eat and presentable. This skill takes a bit of figuring out, but with the help of this article, you won't have to hope that someone else can take on the task, as you'll be able to carve the turkey yourself.
Steps
Once Out of the Oven
-
Place the cooked turkey on a clean wooden board. To check that the turkey is cooked, pull away a leg. If the juices run clear, then it's cooked. It'll be easiest if the legs are placed away from you. -
Allow the turkey to stand at room temperature for 10-15 minutes or longer after roasting. The juices will spread within the turkey, making the meat evenly moist.[1]- This also gives you time to prepare last-minute dishes. Tenting with foil will help keep the bird warm and is also recommended to help keep the meat firmer and juicier.
-
Check the quality of the knife before proceeding. The key to a good carving knife is its sharpness; also, it should have a blade long enough to carve the breast into neat slices, meaning that it should extend about 5 cm (2") beyond the meat on both sides to allow for the sawing action.- Do not use serrated knives or a chopper. It can also help to have a large carving fork to hold the turkey in place.
- If using a carving fork, it should be short, with curved prongs. This type of fork will hold the turkey firmly without damaging the meat, giving you total control over the carving and slicing.
- Some people like to use two knives. They will use the carving knife for slicing the turkey into thin strips and a cook's knife to divide the bird into joints.
- Do not use serrated knives or a chopper. It can also help to have a large carving fork to hold the turkey in place.
-
Warm the serving platter. This is important because it will help the carved meat to retain its heat for longer. You'll be eating this thing for the next six hours, so it's best to be prepared (do you have your sweatpants ready, too?).- Remove any trussing string and foil before carving at this stage.
Removing the Wishbone
-
Remove a little skin from the neck-end of the turkey's breast. This will enable you to see the actual turkey meat, so that you can remove the wishbone. -
Poke into the cavity with your finger, feeling around for the wishbone. Once you've found it, cut around the V-shaped wishbone as close as possible[2] -
Grasp the wishbone carefully and remove it from the turkey. Try to avoid damaging the meat or breaking the wishbone.
-
Allow the wishbone to dry for a few days, and then use it to make a wish. Two people hold the wishbone, one holding each end, and make a silent wish. They then pull the bone apart and whoever gets the longer piece will have their wish come true.- In some traditions, the person who gets the shorter piece will be the first to marry.
Carving the Legs
-
Carve the legs. Cut along the turkey's hip joint with your knife, letting the leg slowly separate from the body of the turkey. Remove the leg completely from the joint once you view the separation.[3]
- The joint should snap free. If not, it can easily be cut with your knife. Don't be afraid to use a little force.
-
Remove as much meat as you can. Carve close to the body, especially near the turkey's back. Note the succulent orb of meat at the base of the back, called the oyster. Consume it as the cook's reward! -
Cut the leg at its knee joint. An easy way to find the joint is by feeling with your finger. It should cut easily.
-
Slice the thigh meat by holding it firmly to the cutting surface with a fork. Cut slices parallel to the bone. This task can be assigned to someone else to save time while you move on to carve other parts of the turkey.[4]- Repeat this process on the other leg. On the serving platter, you may want to keep the sections together to cater to everyone's favorite part of the bird.
Carving the Breasts
-
Cut into the bird alongside its breastbone. Use it as a guide for your knife. You'll have two large sections both busting full of scrumptious meat.[5]
-
Angle the knife and cut the meat away from the carcass. This will cut through the wing joint. At this point, all the meat should be off the body.
- The breast should come easily away from the body, moist and tender. Repeat for the other side.
-
Cut off the wing tips from the breasts. Unless you plan on making a stew later, you won't be needing those.[6]
-
Slice the remaining meat against the grain. Note that the thicker the slices are made, the longer they'll retain heat. If you're serving thin slices in a fan shape, don't wait – get the plates served immediately.
- Finally, don't forget to scoop out the stuffing and serve with the meat. Grab an extra hand from the dining room to help you arrange the platters and stuffing for a speedy delivery -- the faster you go, the warmer the turkey will be.
Community Q&A
-
QuestionWhat kind of fork should I use.
Community AnswerTry to use a larger serving fork. -
QuestionShould I use a girl or boy? How can I tell the gender?
Community AnswerIt won't matter, as turkeys raised for consumption are pretty much equal in % of meat per lb. Young tom turkeys 12-16 lbs. are especially flavorful. -
QuestionCan we just pull Turkey off the bone, with no knives?
Community AnswerNot really. Turkey is lean, so there is not enough fatty tissue to break down and allow for it to pull from the bone.
Video
Tips
-
Removing the wishbone can make it easier to carve the rest of the meat.[7]Thanks
-
Don't throw away any of the bones. You can use them for a tasty turkey soup.Thanks
-
This carving method can also be used for chicken. Duck requires a slightly different method due to its denser texture and elongated breasts.Thanks
Warnings
- Keep cooked poultry bones away from pets. Their brittleness can split and cause damage if ingested.Thanks
- Always aim to cut through joints, not bones.Thanks
- Wash and dry your hands before carving or wearing disposable food-handling gloves.Thanks
Things You'll Need
- 1 sharp knife (a boning or carving knife, which has a long, narrow blade or electric carving knife is best, but any very sharp knife will do)
- 2 cutting boards
- 1 fork and/or rubber gloves or silicone mitt (the turkey is hot!)
- 1 platter (or 2), ready to receive carved pieces
References
- ↑ https://www.artofmanliness.com/articles/how-to-carve-turkey/
- ↑ https://www.seriouseats.com/2014/11/serious-eats-guide-to-carving-turkey.html
- ↑ https://www.realsimple.com/food-recipes/cooking-tips-techniques/carve-turkey
- ↑ https://www.artofmanliness.com/articles/how-to-carve-turkey/
- ↑ https://www.realsimple.com/food-recipes/cooking-tips-techniques/carve-turkey
- ↑ https://www.realsimple.com/food-recipes/cooking-tips-techniques/carve-turkey
- ↑ Larousse Gastronomique, Turkey, p. 1106, (2009), ISBN 978-0-600-62042-6
- Jill Norman, The Cook's Book, p. 218, (2005), ISBN 1-74033-454-X – research source
- Good Housekeeping, The Complete Cook's Book, p. 50, (2000), ISBN 0-00-710074-4 – research source
About this article
To carve a turkey, start by placing it on a cutting board with a well around the edge to collect any juices that drip out. Be sure that the turkey has rested at room temperature for about 30 minutes after roasting. Begin carving the turkey by removing the drumsticks. Cut through the skin above the drumstick, but don’t cut through the joint. Hold the breast with one hand and the drumstick with the other, and push down on the drumstick until the joint pops. Use a sharp knife to cut between the joint and remove the drumstick. Repeat on the other side. Then, take a knife and cut away a little bit of skin from the neck end of the breast so you can see the meat. Locate the wishbone in the cavity with your finger and pull it out. Begin removing the breast meat by cutting straight along the length of the breast bone. Remove each side of the breast by carving along the rib cage with a sharp knife. Remove the wings by cutting through the joints with a sharp knife. Slice the breasts and place them on a platter to serve. Remove the thighs from the drumsticks by cutting through the joints. Then debone the thighs by slicing around the thigh bone. Slice the thigh meat and place on the platter for people who enjoy dark meat. Add your wings and drumsticks to the platter, and serve. If you want to learn more, like how to check the quality of your knife before carving, keep reading the article!
Did this article help you?
