Hudson Plugin to create Azure slaves.

Supports creating

1. Windows slave on Azure Cloud using SSH and JNLP

• For windows images to launch via SSH, the image needs to be preconfigured with ssh.
  For preparing custom windows image, refer to Azure documentation

2. Linux slaves on Azure Cloud using SSH

• For preparing custom linux image, refer to Azure documentation

1. Within the Hudson dashboard, click Manage Hudson.
2. In the Manage Hudson page, click Manage Plugins.
3. Click the Available tab.
4. In the "Cluster Management and Distributed Build" section, select the Azure Slave plugin.
5. Click either “Install without restart” or “Download now and install after restart”.
6. Restart Hudson if necessary.

1. Within the Hudson dashboard, click Manage Hudson --> Configure System --> Scroll to the bottom of the page and find the section with the dropdown "Add new cloud" --> click on it and select "Microsoft Azure"
2. Enter the subscription ID and the management certificate from your publish settings file. If you don’t have a publish settings file, click on the help button and follow the directions to download the publish settings file.
3. Click on “Verify configuration” to make sure that the profile configuration is done correctly.
4. Save and continue with the template configuration (See instructions below)

1. Click on the "Add" option to add a template. A template is used to define an Azure slave configuration, like its VM size, its region, or its retention time.
2. For the template name, provide a valid DNS name. Hudson will create a cloud service with same name if one does not already exists.
3. For the description, provide any remarks you wish about this template configuration. This field is not used for slave provisioning.
4. For the label, provide any valid string. E.g. “windows” or “linux”. The label defined in a template can be used during a job configuration.
5. Select the desired region from the combo box.
6. Select the desired VM size.
7. Specify the Azure Storage account name. Please note that the storage account and cloud service should use the same region. Alternatively you can leave it blank to let Hudson create a storage account automatically if needed.
8. Specify the retention time in minutes. This defines the number of minutes Hudson can wait before automatically deleting an idle slave. Specify 0 if you do not want idle slaves to be deleted automatically.
9. Select a usage option:

• If "Utilize this node as much as possible" is selected, then Hudson may run any job on the slave as long as it is available.
• If "Leave this node for tied jobs only" is selected, Hudson will only build a project (or job) on this node when that project specifically was tied to that node.This allows a slave to be reserved for certain kinds of jobs.

10. For the Image Family or ID , enter either an available image family name or a specific image ID.

• If you want to specify an image family, then just enter the first character with the proper case to see an automatically generated list of available families. Hudson will use the latest image within the selected family.
• If you want to specify a specific image ID, enter the name of the image. Note that since image ID’s are not auto
  populated, the exact name needs to be entered manually. Also, if you are referring to an image using an image ID from
  the public Azure image gallery rather than your own account, note that such public images with specific IDs are available in Azure only for a limited time as they eventually get deprecated in favor of newer images in the same family. For this reason, it is recommended that you use the image family to refer to public platform images, and image ID’s for your own custom-prepared images.

11. For the launch method, select SSH or JNLP.

• Linux slaves can be launched using SSH only.
• Windows slaves can be launched using SSH or JNLP. For Windows slaves, if the launch method is SSH then image needs to be custom-prepared with an SSH server pre-installed.
  

When using the JNLP launch option, ensure the following:

• Hudson URL (Manage Hudson --> configure system --> Hudson Location)
  • The URL needs to be reachable by the Azure slave, so make sure to configure any relevant firewall rules accordingly.
• TCP port for JNLP slave agents (Manage Hudson --> configure global security --> Enable security --> TCP port for JNLP slaves).

  • The TCP port needs to be reachable from the Azure slave launched using JNLP. It is recommended to use a fixed port so that any necessary firewall exceptions can be made.

    If the Hudson master is running on Azure, then open an endpoint for "TCP port for JNLP slave agents" and, in case of Windows, add the necessary firewall rules inside virtual machine (Run --> firewall.cpl).

12. For the Init script, provide a script to install at least a Java runtime if the image does not have Java
    pre-installed.

    For the JNLP launch method, the init script must be in PowerShell. If the init script is expected to take a long time to execute, it is recommended to prepare custom images with the necessary software pre-installed.
    

    For more details about how to prepare custom images, refer to the below links:

    • Capture Windows Image
    • Capture Linux Image

13. Specify a user name and a password as per the rules explained in the help text.

14. Make sure to validate the template configuration by clicking on the link “Verify Template”. This will connect to your Azure account to verify the correctness of the supplied information.

1. Configure an Azure profile and Template as per the above instructions.
2. If the init script is expected to take a long time to complete, it is recommended to use a custom-prepared Ubuntu image that has the required software pre-installed, including a Java runtime
3. For platform images, you may specify an Init script as below to install Java, Git and Ant:

      #Install Java
      sudo apt-get -y update
      sudo apt-get install -y openjdk-7-jdk
      sudo apt-get -y update --fix-missing
      sudo apt-get install -y openjdk-7-jdk
      
      # Install Git
      sudo apt-get install -y git
      
      #Install Ant
      sudo apt-get install -y ant
      sudo apt-get -y update --fix-missing
      sudo apt-get install -y ant

1. Make sure to follow the instructions specified above for JNLP.
2. To customize init script, refer to the sample script at
   https://gist.github.com/snallami/ad44c109928e86c03e1b