How to Find the Measurement of the Diagonal Inside a Rectangle

Co-authored by David Jia

Last Updated: April 12, 2024 Fact Checked

A diagonal is a straight line that connects one corner of a rectangle to the opposite corner.^{[1]
X
Research source} A rectangle has two diagonals, and each is the same length.^{[2]
X
Research source} If you know side lengths of the rectangle, you can easily find the length of the diagonal using the Pythagorean Theorem, since a diagonal divides a rectangle into two right triangles. If you don’t know the side lengths, but you have other information, such as the area and perimeter, or the relationship between side lengths, some extra steps will allow you to find the length and width of the rectangle, and from there you can use the Pythagorean Theorem to find the length and width of the diagonal.

Method 1

Method 1 of 3:

Using the Length and the Width

Download Article

1
Set up the formula for the Pythagorean Theorem. The formula is $a^{2}+b^{2}=c^{2}$ $a^{{2}}+b^{{2}}=c^{{2}}$ , where $a$ $a$ and $b$ $b$ equal the side lengths of a right triangle, and $c$ $c$ equals the length of a right triangle’s hypotenuse.^{[3]
X
Research source}
- You use the Pythagorean Theorem because a diagonal of a rectangle cuts the rectangle into two congruent right triangles.^{[4]
  X
  Research source} The length and width of the rectangle are the side lengths of the triangle; the diagonal is the hypotenuse of the triangle.
2
Plug the length and the width into the formula. These should be given, or you should be able to measure them. Make sure you are substituting for $a$ $a$ and $b$ $b$ .^{[5]
X
Research source}
- For example, if the width of a rectangle is 3 cm, and the length is 4 cm, your formula will look like this: $3^{2}+4^{2}=c^{2}$ .
Advertisement
3
Square the length and width, then add these numbers together. Remember, squaring a number means to multiply the number by itself.^{[6]
X
Research source}
- For example:
  $3^{2}+4^{2}=c^{2}$
  $9+16=c^{2}$
  $25=c^{2}$
4
Take the square root of each side of the equation. The easiest way to find a square root is to use a calculator. You can use an online calculator if you do not have a scientific calculator.^{[7]
X
Research source} This will give you the value of $c$ $c$ , which is the hypotenuse of the triangle, and the diagonal of the rectangle.
- For example:
  $25=c^{2}$
  ${\sqrt {25}}={\sqrt {c^{2}}}$
  $5=c$
  So, the diagonal of a rectangle with a width of 3 cm and a length of 4 cm is 5 cm.

Method 2

Method 2 of 3:

Using the Area and Perimeter

Download Article

The formula is $A=lw$ , where $A$ equals the area of the rectangle, $l$ equals the length of the rectangle, and $w$ equals the width of the rectangle.^{[8]
X
Research source}
2
Plug the area of the rectangle into the formula. Make sure you substitute for the variable $A$ $A$ .
- For example, if the area of the rectangle is 35 square centimeters, your formula will look like this: $35=lw$ .
$Step 3 Rearrange the formula, finding a value for w {\displaystyle w} .$

3
Rearrange the formula, finding a value for $w$ . To do this, divide both sides of the equation by $l$ $l$ . Set this value aside. You will plug it into the perimeter formula later.
- For example:
  $35=lw$
  ${\frac {35}{l}}=w$ .
The formula is $P=2(w+l)$ , where $w$ equals the width of the rectangle, and $l$ equals the length of the rectangle.^{[9]
X
Research source}
5
Plug the value of the perimeter into the formula. Make sure you substitute for the variable $P$ $P$ .
- For example, if the perimeter of a rectangle is 24 centimeters, your formula will look like this: $24=2(w+l)$ .
6
Divide both sides of the equation by 2. This will give you the value of $w+l$ $w+l$ .
- For example:
  $24=2(w+l)$
  ${\frac {24}{2}}={\frac {2(w+l)}{2}}$
  $12=w+l$ .
$Step 7 Plug the value of w {\displaystyle w} into the equation.$

7
Plug the value of $w$ into the equation. Use the value you found by rearranging the formula for area.^{[10]
X
Research source}
- For example, if using the area formula you found that ${\frac {35}{l}}=w$ , replace this value of $w$ into the perimeter formula:
  $12=w+l$
  $12={\frac {35}{l}}+l$
$Step 8 Cancel out the fraction in the equation.$

8
Cancel out the fraction in the equation. To do this, multiply both sides of the equation by $l$ $l$ .
- For example:
  $12={\frac {35}{l}}+l$
  $12\times l=({\frac {35}{l}}\times l)+(l\times l)$
  $12l=35+l^{2}$
9
Set the equation to 0. To do this, subtract the first-degree term from both sides of the equation.
- For example:
  $12l=35+l^{2}$
  $12l-12l=35+l^{2}-12l$
  $0=35+l^{2}-12l$
10
Reorder the equation by order of terms. This means the term with the exponent will be first, followed by the term with the variable, followed by the constant. When reordering, make sure you keep the appropriate positive and negative signs. You should note that the equation is now set up as a quadratic equation.
- For example, $0=35+l^{2}-12l$ becomes $0=l^{2}-12l+35$ .
11
Factor the quadratic equation. For complete instructions on how to do this, read Solve Quadratic Equations.
- For example, the equation $0=l^{2}-12l+35$ can be factored as $0=(l-7)(l-5)$ .
$Step 12 Find the values of l {\displaystyle l} .$

12
Find the values of $l$ . To do this, set each term to zero and solve for the variable. You will find two solutions, or roots, to the equation. Since you are working with a rectangle, the two roots will be the width and length of your rectangle.
- For example:
  $0=(l-7)$
  $7=l$
  AND
  $0=(l-5)$
  $5=l$ .
  So, the length and width of the rectangle are 7 cm and 5 cm.
13
Set up the formula for the Pythagorean Theorem. The formula is $a^{2}+b^{2}=c^{2}$ $a^{{2}}+b^{{2}}=c^{{2}}$ , where $a$ $a$ and $b$ $b$ equal the side lengths of a right triangle, and $c$ $c$ equals the length of a right triangle’s hypotenuse.^{[11]
X
Research source}
- You use the Pythagorean Theorem because a diagonal of a rectangle cuts the rectangle into two congruent right triangles.^{[12]
  X
  Research source} The width and length of the rectangle are the side lengths of the triangle; the diagonal is the hypotenuse of the triangle.
14
Plug the width and length into the formula. It doesn’t matter which value you use for which variable.
- For example, if you found the width and length of the rectangle are 5 cm and 7 cm, your formula will look like this: $5^{2}+7^{2}=c^{2}$ .
15
Square the width and length, then add these numbers together. Remember, squaring a number means to multiply the number by itself.
- For example:
  $5^{2}+7^{2}=c^{2}$
  $25+49=c^{2}$
  $74=c^{2}$
16
Take the square root of each side of the equation. The easiest way to find a square root is to use a calculator. You can use an online calculator if you do not have a scientific calculator.^{[13]
X
Research source} This will give you the value of $c$ $c$ , which is the hypotenuse of the triangle, and the diagonal of the rectangle.
- For example:
  $74=c^{2}$
  ${\sqrt {74}}={\sqrt {c^{2}}}$
  $8.6024=c$
  So, the diagonal of a rectangle with an area of 35 cm and a perimeter of 24 cm is about 8.6 cm.

Method 3

Method 3 of 3:

Using the Area and Relational Side Lengths

Download Article

1
Write a formula explaining the relationship between the side lengths.^{[14]
X
Research source} You can isolate the length ( $l$ $l$ ) or the width ( $w$ $w$ ). Set this formula aside. You will plug it into the area formula later.
- For example, if you know the width of a rectangle is 2 cm more than the length, you can write a formula for $w$ : $w=l+2$ .
2
Set up the formula for the area of a rectangle. The formula is $A=lw$ $A=lw$ , where $A$ $A$ equals the area of the rectangle, $l$ $l$ equals the length of the rectangle, and $w$ $w$ equals the width of the rectangle.^{[15]
X
Research source}
- You can use this method if you know the perimeter of the rectangle, except you would now set up the perimeter formula instead of the area formula. The formula for the perimeter of a rectangle is $P=2(w+l)$ , where $w$ equals the width of the rectangle, and $l$ equals the length of the rectangle.^{[16]
  X
  Research source}
3
Plug the area of the rectangle into the formula. Make sure you substitute for the variable $A$ $A$ .
- For example, if the area of the rectangle is 35 square centimeters, your formula will look like this: $35=lw$ .
4
Plug the relational formula for the length (or width) into the formula. Since you are working with a rectangle, it doesn’t matter whether you work with the $l$ $l$ or $w$ $w$ variable.
- For example, if you found that $w=l+2$ , then you would substitute this relationship for $w$ in the area formula:
  $35=lw$
  $35=l(l+2)$
5
Set up a quadratic equation. To do this, use the distributive property to multiply the terms in parentheses, then set the equation to 0.^{[17]
X
Research source}
- For example:
  $35=l(l+2)$
  $35=l^{2}+2l$
  $0=l^{2}+2l-35$
6
Factor the quadratic equation. For complete instructions on how to do this, read Solve Quadratic Equations.
- For example, the equation $0=l^{2}+2l-35$ can be factored as $0=(l+7)(l-5)$ .
$Step 7 Find the values of l {\displaystyle l} .$

7
Find the values of $l$ . To do this, set each term to zero and solve for the variable. You will find two solutions, or roots, to the equation.
- For example:
  $0=(l+7)$
  $-7=l$
  AND
  $0=(l-5)$
  $5=l$ .
  In this case, you have one negative root. Since the length of a rectangle cannot be negative, you know that the length must be 5 cm.
8
Plug the value of the length (or width) into your relationship formula. This will give you the length of the other side of the rectangle.
- For example, if you know that the length of the rectangle is 5 cm, and that the relationship between the side lengths is $w=l+2$ , you would substitute 5 for the length in the formula:
  $w=l+2$
  $w=5+2$
  $w=7$
9
Set up the formula for the Pythagorean Theorem. The formula is $a^{2}+b^{2}=c^{2}$ $a^{{2}}+b^{{2}}=c^{{2}}$ , where $a$ $a$ and $b$ $b$ equal the side lengths of a right triangle, and $c$ $c$ equals the length of a right triangle’s hypotenuse.^{[18]
X
Research source}
- You use the Pythagorean Theorem because a diagonal of a rectangle cuts the rectangle into two congruent right triangles.^{[19]
  X
  Research source} The width and length of the rectangle are the side lengths of the triangle; the diagonal is the hypotenuse of the triangle.
10
Plug the width and length into the formula. It doesn’t matter which value you use for which variable.
- For example, if you found the width and length of the rectangle are 5 cm and 7 cm, your formula will look like this: $5^{2}+7^{2}=c^{2}$ .
11
Square the width and length, then add these numbers together. Remember, squaring a number means to multiply the number by itself.
- For example:
  $5^{2}+7^{2}=c^{2}$
  $25+49=c^{2}$
  $74=c^{2}$
12
Take the square root of each side of the equation. The easiest way to find a square root is to use a calculator. You can use an online calculator if you do not have a scientific calculator.^{[20]
X
Research source} This will give you the value of $c$ $c$ , which is the hypotenuse of the triangle, and the diagonal of the rectangle.
- For example:
  $74=c^{2}$
  ${\sqrt {74}}={\sqrt {c^{2}}}$
  $8.6024=c$
  So, the diagonal of a rectangle with a width that is 2 cm more than the length, and an area of 35 cm, is about 8.6 cm.

Community Q&A

Search

Add New Question

Question

The diagonal of a rectangle is 25 cm. If one of the rectangle's sides is 15 cm, how do I calculate the area?

Donagan

Top Answerer

Use the Pythagorean Theorem to find the other side. Then multiply the length by the width.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 9
Question

What is the diagonal if the width is 24' and the length is 20'?

LyKaxandra Caimoy

Community Answer

√[(24^2 )+(20^2)] = √576+400 = √976 = 4√61`

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 8
Question

What is the diagonal measurement of a rectangle 150 feet in length by 100 feet in width?

Community Answer

Use the Pythagorean Theorem (a^2 + b^2 = c^2). A and B are the lengths of the two sides of the rectangle. To get the length of the hypotenuse, you would need to solve for C. C is the square root of (A squared plus B squared). So c = (a^2 + b^2)^.5.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 8